Barco SIM 7Q HB - Lamp Fixation (SIM 7 Q & SIM 7 Q HC); Lamp Fixation (SIM 7 Q HB & SIM 7 Q HB&C); Lamp Power Connector (SIM 7 Q HB & SIM 7 Q HB&C)

8. Maintenance
3
3
2
2
1
1
Image 8-29
Lamp fixation (SIM 7Q & SIM 7Q HC)
33
2
2
1
1
Image 8-30
Lamp fixation (SIM 7Q HB & SIM 7Q HB&C)
4. Then firmly push the top side of the lamp (2), while carefully pushing the lamp locking handle down (3). See image 8-29 and
image 8-30.
5. Check the fixation of the lamp by trying to move it left-right and up-down: it should not move!
6. In case of SIM 7Q HB & SIM 7Q HB&C, plug in the lamp power connector.
Image 8-31
Lamp power connector (SIM 7Q HB & SIM 7Q HB&C)
7. Install the lamp door (1) and tighten the three screws (2). Mind the positioning pins and holes.
R59770066 SIM 7Q SERIES 07/10/2013
249