2. Packaging
How to unpack the projector ?
1. Release the cord straps.
PULL
TO OPE
Image 2-2
2. Remove the assembly from the pallet
3. Open the outer cardboard box
4. Remove the two smaller box, which contains:
- User guide and Safety manual
- RCU + batteries
- power cords
- projection lens
5. Remove the foam parts
6. Open the inner cardboard box
7. Remove the foam parts
8. Lift the projector out of the inner cardboard box
outer box
manuals
RCU
power cords
foam parts projectorinner box
small box
projection lens
small box
Image 2-3
Unpacking the cardboard box: exploded view
Retain the original shipping cardboard boxes and packing material. It will be needed if you ever have to ship
the projector. For maximum protection, repack your projector as it was packed at the factory.
R59770066 SIM 7Q SERIES 07/10/2013 11
To Next Page
Loading...
