Barco SIM 7Q HB - Removing the Electronics Filter; Electronics Filter Cover: Fixation Screws; Electronics Filter: Pull It out a few Centimeters; Electronics Filter: Release the Side Filter Cover

8. Maintenance
8.3.3 Removing the electronics filter
Necessary tools
Torx screwdriver T10
How to remove the electronics filter?
1. Loosen the two screws fixing the filter cover
Tip: These s cre ws are fix ed to the electronics filter cover and can not drop.
Image 8-10
Electronics filter cover: fixation screws
2. Use the handle on the electronics filter cover to pull out the filter a few centimeters
Image 8-11
Electronics filter: pull it out a few centimeters
3. Release the electronics filter cover from the filter by moving it first downward, then forward
1
2
Image 8-12
Electronics filter: release the side filter cover
4. Pull out the electronics fi
lter
240
R59770066 SIM 7Q SERIES 07/10/2013