7. Advanced
7.7.1 Pause
Pause
The Pause function allows to interrupt the image display. The dimmer and lens opening are set to minimal position, the projector
remains with full power (lamp is on) for immediate restart.
How to pause the image display ?
1. Press MENU to activate the Tool bar
2. Press → to select General
3. Press ↓ to Pull down the General menu
4. Use ↑ or ↓ to select Pause
Image 7-107
5. Press ENTER
The image display is stopped
The projection can also be interrupted using the PAUSE key on the RCU. To restart the image projection press
PAUSE
148 R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
Loading...
