8. Maintenance
8.4.3 Resetting the lamp runtime
Necessary tools
No tools.
Description
The lamp runtime must be reset whenever a lamp is replaced by a new one.
WARNING: Both lamp runtime reset and lamp replacement can only be done by Barco trained and qualified
service technicians.
Resetting the lamp runtime
1. In the projector’s OSD, browse to Lam ps > Res et runtime.
Image 8-36
2. Press ENTER to confirm.
A dialog box is displayed
Image 8-37
3. Enter the serial number of the new lamp.
4. Press ACCEPT to confirm the serial number.
The lamp runtime is now set to zero.
5. Exit the menu.
252
R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
Loading...
