7. Advanced
Image 7-27
• Color space : allows to select between 5 different color spaces
-RGB
-ITU_BT_709
- SMPTE_240M
-ITU_BT_601
-EBU
• Clamp position : allows to set the clamp pulse position in the clamping circuit
• Clamp width : allows to set the width of clamp pulse in the clamping circuit
It is recommended to use the default values.
Advanced settings for Digital Data sources (DVI)
The advanced button enables the advanced settings for digital data sources.
Image 7-28
UsePictureBox can be disabled (0) or enabled (1). By default, it is disabled which means that only few timings can be changed. In
case of a DVI source this is not a problem.
In very specific situations however (e.g. iBlend), more changes to the timings may be needed, such as the setting of the Start pixels,
Active pixels , Start lin es, Active lines. In that case, hit Enter and change the slider to position 1, thus enabling more settings in the
Edit file menu.
Image 7-29
94 R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
Loading...
