7. Advanced
How to adjust using the Edit and Change mode ?
Adjusting point (row =0 ; column =0) by 100 (pixels) along the x axis in the 2x2 mode
1. Press 2 times ENTER to go to the Edit Mode
The Edit mode is selected
Image 7-66
2. Use ↑ and ↓ to select the PixelsX edit box
The PixelsX edit box is focused
3. Press ENTER
The PixelsX edit box is put in edit mode
Image 7-67
4. Use ← and → to select the digit and use ↑ and ↓ to increment/decrement the digit
Tip: One can also us e the numeric digits to fill in the desired value ?
The image is distorted along the X axis. Notice the unaffected regions.
122
R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
Loading...
