Barco SIM 7Q HB - Page 192

7. Advanced
0.1
0.20.1 0.3 0.4 0.5 0.6 0.7 0.8
0.2
0.3
0.4
0.5
0.6
0.7
0.8
X
Y
G1
W1
G2
W2
R1
R2
B1
B2
Gc
Rc
Wc
Bc
Image 7-156
R1 Red projector 1
R2 Red projector 2
G1 Green Projector 1
G2 Green Projector 2
B1 Blue Projector 1
B2 Blue Projector 2
W1 White Projector 1
W2 White Projector 2
Rc Red Common Color Gamut
Gc Green Common Color Gamut
Bc Blue Common Color Gamut
Wc White Common Color Gamut
The following parameters can be adjusted within DynaColor™:
• the x, y coordinates and L (Light Output) of the 6 Common Color Gamut perimeter points.
• the x, y coordinates and L (Light Output) of the White point of the Common Color Gamut.
The Dynacolor™ Interface
Field / item
Description
Measured values
The coordinates in the CIE Chromaticity diagram and luminance of the native
primary colors of the projector as they have been measured in ideal conditions in
the factory. Only Barco engineers may change these values.
X and Y coordinates Coordinates in the CIE Chromaticity diagram
Red, Green, Blue, White Native primary colors and native white of the projector
L value Luminance (relative value)
White L White luminance = Red + Blue + Green luminance (relative value)
188 R59770066 SIM 7Q SERIES 07/10/2013