7. Advanced
A dialog box is displayed for the Red color
Image 7-162
10.Fill in the measured x and y and coordinates and the Y value
Note: theYvaluewillbetransformedinaLvaluebytheprojector
11. Press Proceed
A Green test pattern is displayed
12.Proceed in the same way for Green, Blue and White as for the Red color
13.The values are finally updated in the measured values of the Dynacolor dialog box.
14.Press Default desired to copy the measured values for Red, Green, Blue and White and to calculate the secondary colors Cyan,
Yellow and Magenta.
R59770066 SIM 7Q SERIES 07/10/2013
197
To Next Page
Loading...
