4. Installation
A dialog box will be displayed.
Image 4-39
5. Push the cursor key ↑ or ↓ to highlight the desired parameter.
6. Use the cursor key ← or → , the numeric keys on the RCU, or the local keypad, to edit and change the values.
7. Press Apply settings to apply the changes
A dialog box is shown. The different executed operations are shown with a checkbox. The last operation Restarting ne twork
takes a few seconds more.
Image 4-40
46 R59770066 SIM 7Q SERIES 07/10/2013
To Next Page
Loading...
