Bosch B9512G - Page 14

14 en | Table of contents Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
12.1.6 Custom Function 227
12.1.7 Door Point 228
12.1.8 Door Point Debounce 228
12.1.9 Interlock Point 229
12.1.10 Auto Door 229
12.1.11 Fire Unlock 229
12.1.12 Disarm on Open 230
12.1.13 Strike Time 230
12.1.14 Shunt Time 230
12.1.15 Buzz Time 231
12.1.16 Extend Time 231
12.1.17 Deactivate on Open 231
12.1.18 RTE Shunt Only 232
12.1.19 RTE Input Debounce 232
12.1.20 REX Shunt Only 232
12.1.21 REX Input Debounce 233
12.1.22 Access Granted 233
12.1.23 No Entry 233
12.1.24 Enter Request 234
12.1.25 Exit Request 234
12.1.26 Failure Mode 234
12.1.27 Enclosure Tamper 234
12.2 Global Access settings 235
12.2.1 Card Type 235
13
Automation / Remote App 236
13.1 Automation Device 236
13.2 Status Rate 236
13.3 Automation Passcode 236
13.4 Mode 1 Automation Ethernet Port Number 237
13.5 Remote App 237
13.6 Remote App Passcode 237
14
SDI2 modules 238
14.1 B208 Octo-input 238
14.1.1 Enclosure Tamper 238
14.2 B299 POPEX 238
14.2.1 Module Enclosure Tamper 239
14.3 B308 Octo-output 239
14.3.1 Module Enclosure Tamper 239
14.4 (B42x) IP Communicator 239
14.4.1 Module Enclosure Tamper 240
14.4.2 IPv6 Mode 240
14.4.3 IPv4 DHCP/AutoIP Enable 240
14.4.4 IPv4 Address 241
14.4.5 IPv4 Subnet Mask 241
14.4.6 IPv4 Default Gateway 242
14.4.7 IPv4 DNS Server IP Address 242
14.4.8 IPv6 DNS Server IP Address 242
14.4.9 UPnP (Universal Plug and Play) Enable 242
14.4.10 HTTP Port Number 243