Bosch B9512G - Page 15

Control Panel Table of contents | en 15
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
14.4.11 ARP Cache Timeout (sec.) 243
14.4.12 Web/USB Access Enable 243
14.4.13 Web/USB Access Password 243
14.4.14 Firmware Upgrade Enable 244
14.4.15 Module Hostname 244
14.4.16 Unit Description 244
14.4.17 TCP/UDP Port Number 244
14.4.18 TCP Keep Alive Time 245
14.4.19 IPv4 Test Address 245
14.4.20 IPv6 Test Address 245
14.4.21 Web and Automation Security 245
14.4.22 Alternate IPv4 DNS server IP address 246
14.4.23 Alternate IPv6 DNS server IP address 246
14.5 B450 cellular 246
14.5.1 Inbound SMS 246
14.5.2 Session Keep Alive Period (min.) 247
14.5.3 Inactivity Time Out (min.) 247
14.5.4 Reporting Delay for Low Signal Strength (sec.) 247
14.5.5 Reporting Delay for No Towers (sec.) 248
14.5.6 Outgoing SMS Length 248
14.5.7 SIM PIN 249
14.5.8 Network Access Point Name (APN) 249
14.5.9 Network Access Point User Name 250
14.5.10 Network Access Point Password 250
14.6 B520 aux power supply 250
14.6.1 Module Enable 251
14.6.2 Module Enclosure Tamper 251
14.6.3 One or Two Batteries 251
14.7 Wireless Receiver 251
14.7.1 Wireless Module Type 252
14.7.2 Module Enclosure Tamper 253
14.7.3 System (Repeater) Supervision Time 253
14.7.4 Low Battery Resound 253
14.7.5 Enable Jamming Detection 253
14.8 Wireless Repeater 254
14.8.1 Module Enclosure Tamper 254
14.8.2 RADION RFID (B810) 254
14.8.3 Inovonics RFID (B820) 255
15
Hardware switch settings 256
15.1 Keypad address 256
15.2 B208 Octo-input Module switch settings 258
15.3 B299 POPEX Module switch settings 260
15.4 B308 Octo-output Module switch settings 260
15.5 B426 Ethernet Communication Module switch settings 262
15.6 B450 Cellular Module switch settings 262
15.7 B520 Power Supply switch settings 263
15.8 B810 RADION wireless receiver switch settings 263
15.9 B820 Inovonics wireless receiver switch settings 263
15.10 B901 Access Module switch settings 263