Bosch B9512G - Page 185

Control Panel Points | en 185
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
Point Profile
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
Point Response Default 1 9 0 0 E 8 8 F 8 0 4 4 0 4 0 0
Point Profile
33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48
Point Response Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Point Profile
49 50 51 52 53 54 55 56 57 58 59 60 61 62 63
Point Response Default 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Selections:0 – 9, A – F
The combined Point Type / Response / Circuit Style parameter allows you to configure all
three parameters in a single window.
Figure10.1: Point type-response-circuit style window
The Point Response parameter in combination with the Point Type parameter determines how
the control panel responds to changes on point sensor loops (open, short, normal) for wired
points, or changes in point states for wireless point devices (fault, normal, trouble).
The tables below show the Point Response selections for:
– 24 Hour, Fire, Gas, and AUX AC Supervision
– Controlled point types – Part On, Interior, and Interior Follower
– Keyswitch Maintained
– Keyswitch Momentary
– Open/Close Point
– Custom Function
Notice!
Changing Point Type automatically changes Point Response to default
Selecting a Point Type automatically changes the Point Response to the default for that Point
Type.