Bosch B9512G - Page 21

Control Panel Compliance Settings | en 21
Bosch Security Systems, Inc. Program Entry Guide 2017.03 | 09 | F.01U.303.998
If you set PointType/Response/Circuit Style > Circuit Style to SingleEOL(1KΩ) or
SingleEOL(2KΩ), set Response to: 9.
If you set Point Type / Response / Circuit Style > Circuit Style to DualEOL, set Response to: 2.
Figure2.2: Point Profiles
Figure2.3: Point Type Response and Circuit Style
POINTS > Point Assignments
Set the POINTS > Point Assignments, Text and Profile parameters, for on-board points 1, 2,
and 3 as follows.