Bosch B9512G - Trouble Event Management

24 en | Compliance Settings Control Panel
2017.03 | 09 | F.01U.303.998 Program Entry Guide Bosch Security Systems, Inc.
Figure2.7: Panel Wide Outputs
POINTS > Point Profiles (Point Indexes)
Configure Point Profile 20 as shown below.
It is important to configure the parameters in order.
Point Profile 20
Set Point Profile Text (First Language) to: CF: Silence.
Set PointType/Response/Circuit Style > PointType to: Custom Function.
Leave PointType/Response/Circuit Style > Circuit Style at the default: SingleEOL(1KΩ).
Leave PointType/Response/Circuit Style > Response at the default: 7.