Bosch IRIS-Net User Manual

/CLR R / W NONE,
1...16
List of currently reset Memo flags
Commands for Receive and Transmit
job codes
/JOB /RX1 /ID R / W 0...1023 Number (ID) for job code to be
received. Each power amp can receive
and interpret up to 5 job codes.
/FNCT R / W NOTHING,
POWER,
ABS, REL,
TOG- GLE,
PRESET,
MONI,
GFRES,
MEMFLAG,
MEAS,
TEST- GEN
Function when receiving a job code.
For further details please refer to table
"Job Codes - Receive Functions" on
this page.
/PRM /... Parameters and values for functions
mentioned above
... (same as above but for receiving Job
Codes 2 to 5)
/RX5 ...
/TX1 /ID R / W 0...1023 Number (ID) for job code to be
transmitted. Each power amp can
transmit up to 5 job codes.
/TIME R / W 0...10.0 [s] Delay / debounce time for programmed
condition
/FNCT R / W NOTHING,
POWER,
ABS,
TEMP, VU,
CTL_IN,
ERR- FLAG,
MEMFLAG,
PRESET
Condition that triggers the
transmission of a job code. For further
details please refer to table "Job
Codes - Transmit Functions" on this
page.
/INV R / W ON, OFF Inverts the result of the programmed
condition
/PRM /... Parameters and values for functions
mentioned above
... (same as above but for transmitting
Job Codes 2 to 5)
IRIS-Net REMOTE AMPLIFIER | en 159
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956

Bosch IRIS-Net Specifications

General

Brand	Bosch
Model	IRIS-Net
Category	Security System
Language	English