Bosch IRIS-Net User Manual

/TX5 ...
/LAST /RX R / W 0000...03F
F
The ID (hex code) of the last received
job code is dis- played during reading.
Writing simulates the reception of a job
code with the stated ID (hex code) by
the power amp.
/TX R / W 0000...03F
F
The ID (hex code) of the last
transmitted job code is displayed
during reading. Writing transmits a job
code with the stated ID (hex code).
Commands for the Pilot Tone
Generator
/PILOT /A /
SWITC
H
R / W ON, OFF Pilot tone generator ON / OFF for
channel A
/
LEVEL
R / W -128...+20
[dBu]
Pilot tone generator level for channel A
/
ERRO
R
R ON, OFF Channel A pilot tone error
/
INPUT
R ON, OFF Pilot tone recognized at input A
/
OUTP
UT
R ON, OFF Pilot tone at output A
/B ... (same as above, but for channel B)
Commands for Amplifier Output Load
/LOAD /A /MIN R / W Lower output load threshold for
channel A (interpretation in error flag
ZMIN_A)
/MAX R / W Upper output load threshold for
channel A (interpretation in error flag
ZMAX_A)
/B ... (same as above, but for channel B)
/MEAS R W
A, B
Reading displays the actual output load
values including MIN and MAX values
that occurred.
Writing the channel names resets MIN
and MAX values.
IRIS-Net REMOTE AMPLIFIER | en 160
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956

Bosch IRIS-Net Specifications

General

Brand	Bosch
Model	IRIS-Net
Category	Security System
Language	English