RIGHTS WHEN EDITING THE DSP CONFIGURATION
There are several ways to restrict the rights for editing the DSP configuration of a N8000. Generally, editing the DSP
configuration is only possible when logged-in in IRIS-Net as administrator. Therefore, it is advisable to create additional
user accounts in an IRIS-Net project, besides the administrator account, and to assign appropriate passwords. Please
also refer to the corresponding chapter "Password Protection of a Project" on.
In addition, there is the option to determine for each single DSP block, whether a user that has no administrator rights
may open the associated configuration dialog box.
To prevent access to the configuration dialog of a DSP block, you must be logged in as administrator. Open the
contextual menu of the corresponding DSP block and deselect the contextual menu item "Dialog Visible".
PRESET MANAGER
The Preset Manager takes care of managing all N8000 presets. A preset holds all parameters of the current DSP
configuration, e.g. equalizer settings, matrix nodes or delay values. Presets also hold the labels of input and output
blocks, e.g. Analog Input, Analog Output, 8-Channel Mic Input, CobraNet Input and CobraNet Output. Labels of all
other DSP-Blocks, e.g. matrix labels are not included.
Presets have no influence on the DSP configuration itself - amount, type and wiring of DSP-Blocks.
Element
Description
List of all NetMax N8000 presets. Selecting a preset with the left
mouse button shows a description of the correspondent preset in
the Preset Description window.
IRIS-Net DIGITAL MATRIX | en 319
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
Need help?
General
