Speaker
The Speaker Dialog offers the possibility to load the acoustic measurement data of different loudspeaker systems,
assign it to the sound system processor channels and display the acoustic results. The speaker system datasets, which
are provided as “speaker files” (*.spk), contain factory-measured frequency- and phase responses of loudspeaker
systems.
The speaker data as well as any settings made in this window have no direct influence on the transfer function of the
sound system processor. Nevertheless, they provide the user with the possibility for creating loudspeaker systems
presets of a higher quality. Overlaying the measured frequency- and phase responses in the equalizer and crossover
windows enables the user to customize the filter parameters. The summing display mode shows the result of sound
system processor plus speaker transfer functions.
Clicking on the Speaker tab in the Configuration Panel opens the Speaker Dialog.
IRIS-Net DIGITAL SOUND PROCESSOR | en 644
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
Need help?
General
