DCF77 SIGNAL STATUS Indicates the DCF77 signal strength:
– Green: Signal strength OK
– Red: Signal strength not OK
DPM 4000 SYNCHRONIZATION Select this option to synchronize the internal clock of the PMX-4CR12 with a
connected DPM 4000 system.
NETWORK SYNCHRONIZATION Select this option to synchronize the internal clock of this PMX-4CR12 with
the internal clock of another PMX-4CR12 connected via Ethernet.
TIME MASTER Select the PMX-4CR12 (connected via Ethernet) to synchronize the internal
clock with. This drop down can only be used if the NETWORK
SYNCHRONIZATION option is selected.
ENABLE SLAVE CLOCK Select this checkbox if slave clocks are connected to the PMX-4CR12.
CURRENT SLAVE CLOCK TIME Set the time for the slave clocks.
FIRMWARE Indicates the firmware version of the PMX-4CR12 when on-line.
Opens the firmware update dialog.
NOTE: The default password for the firmware update is “0000”.
Reboots the PMX-4CR12.
Security Dialog
In this dialog the password of the devices can be edited.
Element Description
LOCK PASSWORD (ACCESS LEVEL 2) Press the change button to edit the setting of the password for locking call
stations.
CST SETUP PASSWORD (ACCESS
LEVEL 3)
Press the change button to edit the setting of the password for the setup of
call stations.
WEB AND EXTERNAL TOOL ACCESS
PASSWORD
Press the change button to edit the setting of the password for web and
external tool access (for example, Hotswapper) of the system.
GO ONLINE PASSWORD (ACCESS
LEVEL 3)
Press the change button to edit the setting of the password for going online
in IRIS-Net.
FIRMWARE UPDATE PASSWORD
(ACCESS LEVEL 4)
Press the change button to edit the setting of the password for updating the
firmware of the system.
IRIS-Net
PROMATRIX 6000 | en 838
Bosch Security Systems B.V. User Manual 2017.05 | 3.20 | F.01U.119.956
To Next Page
Loading...
Need help?
General
