Printer Maintenance
BBP
®
35/37 User’s Manual 178 Rev A
Cleaning the Cutter Blade Exit Area
This procedure cleans the cutter blade exit area and the exit chute.
Materials Required
•BBP
®
35/37 Cleaning Kit
• Isopropyl Alcohol
To clean the exit chute:
1. Moisten a swab from the cleaning kit with the alcohol, then clean the exit chute entrance
and exit chute ramp.
Note: To reach all areas of the exit chute, you can close the enclosure cover and
tilt the printer up on its side.
To Next Page
Loading...
