Brady BBP 35 - Font; Check Digit

Formatting a Label
Rev A 69 BBP
®
35/37 User’s Manual
Font
To change the font of the human readable text:
1. In the Editor, touch the barcode element.
1. In More Options, touch the right arrow .
2. Under Human Readable Text, touch Font .
3. Under Available fonts, touch the up or down arrow in the scroll bar to display more fonts.
4. Touch the desired font.
5. Touch the Size: data field and enter the desired size of the font.
6. Touch the desired attribute to use (Bold, Italic, or Underline).
7. When finished, touch OK .
Check Digit
A check digit is used for error detection in a barcode. It consists of a single digit computed
from the other digits in the barcode. To include a check digit character in your barcode:
1. In the Editor, touch the barcode element.
2. In More Options, touch the right arrow .
3. Touch the Include check character option box to place a checkmark in the box.
4. To have the check character display with the barcode, check Readable check character
option box.
Note: The Readable check character option box is only available when the Include
check character option box is checked.