Brady BBP 35 - Print;Cut

Formatting a Label
Rev A 65 BBP
®
35/37 User’s Manual
Print/Cut
If using the BBP
®
37 printer, you have the ability to cut out the label text. The default is set to
Print, thereby printing the label text when the Print button is selected. To cut out text, using
printer model BBP
®
37:
1. Touch the text element containing the text to cut.
2. In the Text Control Panel, above More Options, touch the left arrow to reach the
Print/Cut screen.
3. Touch Cut option box.
Weeding
Weeding affects printing and cutting multiple lines of text. When there are multiple lines of
text, weeding by line cuts out the letters and also cuts out a box for each line. Weeding by line
enables you to remove the background tape one line at a time. Weeding by object cuts out the
letters and cuts out a box surrounding all the letters. If Weeding is turned off, no box is cut.
To access Weeding:
1. In the Control Panel, in More Options, touch Left to move to the Print/Cut screen.
2. Touch Cut Text option box.
3. Under Weeding, touch the desired weeding option (None, Line, Object) , ,
.
Refer to XY Cutting on page 97 for information on actually cutting out the text.
Note: To more accurately transfer the cut out text to the application surface, use
Brady Transfer Tape #76737.