Getting Started
Rev A 33 BBP
®
35/37 User’s Manual
Zoom
To view label text in larger or smaller increments, use the Zoom controls in Tools.
1. To enlarge the label view, touch Zoom In button as many times as needed to increase
to the desired size of the view.
2. To decrease the label view, touch Zoom Out button as many times as need to
decrease to the desired size of the view.
Note: Zooming in or out only increases or decreases the size of the view. It does
not change the size of the printed text.
Scrolling
The Editor supports horizontal and vertical scrolling when displayed elements do not fit the
display area.
To view hidden parts of a label:
1. Touch a scroll arrow to scroll in the direction you want to view.
The ruler value updates automatically as the label view changes. If the entire label is shown on
the display, no scroll arrows display.
2. Continue to touch the scroll arrow as many times as needed to scroll in the direction you
want. (You can hold the scroll arrow down to continuously scroll.)
3. To return to normal viewing mode, touch the scroll arrow(s) in the opposite direction until
the label contents are in view.
OR
Touch Zoom Out enough times to bring all the label contents back in view.
To Next Page
Loading...
