Brady BBP 35 - Cleaning the XY Cutter Blade (BBP 37 ONLY); Materials Required

Printer Maintenance
BBP
®
35/37 User’s Manual 184 Rev A
Cleaning the XY Cutter Blade (BBP
®
37 ONLY)
Materials Required
•BBP
®
35/37 Cleaning Kit
• Isopropyl Alcohol
To clean the XY cutter blade:
1. Remove power and media from the printer. (Review page 5 to page 10.)
2. Open the cover of the printer
3. Unscrew the thumbscrew of the XY cutter module.
4. Lift the cutter module from the carriage.
5. Using a cotton swab moistened with the Isopropyl alcohol, clean off any dust from the
area where the blade sticks out.