Formatting a Label
BBP
®
35/37 User’s Manual 42 Rev A
Undo
The Undo function “undoes” the last action taken, whether editing an element, adding
information, or deleting data. To Undo the last action:
1. Touch Undo .
No specific element needs to be selected. Undo puts the element and/or label back to the state
it was in before the last action was taken. Undo can be pressed multiple times to keep undoing
previous actions.
Size
Changes the size of the object element boundary (height and width). To change the size of the
element:
1. Touch the object element to select it.
2. From Tools, touch Size .
A left/right, up/down, and diagonal arrow display on the element boundary.
3. To increase or decrease the height of the box, touch the up/down arrow and drag your
finger down, or up, on the screen.
4. To increase or decrease the length of the box, touch the left/right arrow and drag your
finger right, or left, on the screen.
5. To increase or decrease the height and length of the box at one time, touch the diagonal
arrow and drag your finger diagonally on the screen.
You can manually increase or decrease the size of your selected element. To manually change
the size:
1. In the Control Panel for the selected element, touch the Plus button to increase the
size; touch the Minus button to decrease the size.
Manually changing the size affects the entire element, regardless of what is selected within
that element (i.e., a specific word in a text element).
To Next Page
Loading...
