Brady BBP 35 - Ratio; Density; Human Readable Text

Formatting a Label
BBP
®
35/37 User’s Manual 68 Rev A
Ratio
Ratio indicates the ratio of bar height to symbol length. Not all barcode symbology allows you
to change the ratio. If you are using a symbology that does not support this option (i.e., QR
Code (2D) or PDF417 (2D), the Ratio buttons do not display. For those that do support it, to
change the ratio:
1. In the Editor, touch the barcode element.
2. In the Barcode control panel, touch the ratio button desired.
Density
The density refers to the thickness of the bars and spaces within a barcode. To change the
density:
1. In the Editor, touch the barcode element.
2. In the Barcode control panel, touch the Density button.
3. In the Density dialog box, touch the desired density button.
4. Touch OK .
Human Readable Text
Human readable text is the data entered that makes up the barcode. Because you cannot read
bars and spaces, you can display the actual text that makes up the barcode. To display Human
Readable Text:
1. In the Editor, touch the barcode element.
2. In More Options, touch the right arrow .
3. Next to Human Readable Text, touch the button that displays where
you want the human readable text to display (above the barcode or below).
4. If you do not want human readable text to display, touch None button.