Brady BBP 35 - Dust Cleaning; Materials Required

Printer Maintenance
Rev A 181 BBP
®
35/37 User’s Manual
Dust Cleaning
Dust generated by media cuts can accumulate in the unit. If a significant amount of dust is
built up, clean the unit using this procedure.
Materials Required
•BBP
®
35/37 Cleaning Kit
• Isopropyl Alcohol
• Compressed Air Bottle, purchased locally (e.g., HOSA AIR-464 Gear Duster)
To clean dust from the unit:
CAUTIONCAUTION
Always wear safety glasses when using compressed air.
1. Remove power and media from the printer. (Review page 5 to page 10.)
2. Using compressed air, spray all visible areas inside the printer to remove accumulated
dust.
3. Using a cloth moistened with isopropyl alcohol, wipe any remaining dust from inside the
printer.
4. Wipe exterior cover and frame of printer for dirt and residue.