Brady BBP 35 - Power Errors; Printing Errors

Printer Maintenance
BBP
®
35/37 User’s Manual 182 Rev A
Cleaning the Printhead
Materials Required
•BBP
®
35/37 Cleaning Kit
• Isopropyl Alcohol
To clean the printhead:
1. Remove power and media from the printer. (Review page 5 to page 10.)
2. Fill the plastic bottle from the cleaning kit with isopropyl alcohol.
Note: Do not rub the swab over the bronze-colored area of the printhead.
3. Moisten one of the foam swabs from the cleaning kit with the alcohol and gently rub
across the green and black area of the printhead.
CAUTIONCAUTION
Use only the materials supplied in the cleaning kit. Using other materials may
permanently damage the printhead.
4. Replace the ribbon and tape.
5. Close all covers and plug in the power cord.