Brother DCP 8085DN

5-49
Confidential
9.10 Hinge Base R
(1) Remove the three cup B M3x10 Taptite screws, and then remove the Hinge base R.
Fig. 5-38
9.11 Hinge ASSY L
(1) Remove the two cup B M3x10 Taptite screws and the cup S M3x12 Taptite screw, and
then remove the Hinge ASSY L.
Fig. 5-39
Taptite cup B M3x10
Hinge base R
Document cover LGL
<Lower side>
Taptite cup S M3x12
Taptite cup B M3x10
Hinge ASSY L
Document cover LGL
<Lower side>