Brother MFC-7450

1-48
Confidential
(3) Communication code compatibility [checking the NSF and DIS]
(4) Instructions received from the remote terminal [checking the NSC, DTC, NSS, and DCS]
(5) Command reception [checking the NSF and DIS after transmission of NSS and DCS]
Code 1 Code 2 Causes
32 01
Remote terminal only with V.29 capability in 2400 or 4800 bps
transmission.
32 02 Remote terminal not ready for polling.
32 10
Remote terminal not equipped with password function or its
password switch OFF.
32 11
Remote terminal not equipped with or not ready for confidential
mailbox function.
32 12
Remote terminal not equipped with or not ready for relay
broadcasting function.
32 13 No confidential mail in the remote terminal.
32 14
The available memory space of the remote terminal is less than
that required for reception of the confidential or relay broad-
casting instruction.
32 18 Remote terminal not equipped with color function.
Code 1 Code 2 Causes
40 02 Invalid coding system requested.
40 03 Invalid recording width requested.
40 05 ECM requested although not allowed.
40 06 Polled while not ready.
40 07 No document to send when polled.
40 10 Nation code or manufacturer code not correct.
40 13
Polled by any other manufacturers' terminal while waiting for
secure polling.
40 17 Invalid resolution selected.
40 20 Invalid full color mode selected.
Code 1 Code 2 Causes
50 01
Vertical resolution capability changed after compensation of
background color.