Bruker SampleXpress User Manual

115
Z31900_00_01
Error Codes
117.410.012 Sensor Error: Clutch:
both sensors active!
The internal plausibility check of
the sensors failed. The system
stopped to avoid any damage
to the equipment.
Contact Bruker for replacing the
defective parts.
117.410.013 Sensor Error: Cas-
sette Clamp: both
sensors active!
The internal plausibility check of
the sensors failed. The system
stopped to avoid any damage
to the equipment.
Contact Bruker for replacing the
defective parts.
117.410.014 Sensor Error: Sam-
ple Guide: both sen-
sors active!
The internal plausibility check of
the sensors failed. The system
stopped to avoid any damage
to the equipment.
Contact Bruker for replacing the
defective parts.
117.410.015 Sensor Error: Sam-
ple Release: both
sensors active!
The internal plausibility check of
the sensors failed. The system
stopped to avoid any damage
to the equipment.
Contact Bruker for replacing the
defective parts.
117.410.016 Sensor Error: Sam-
ple Chain Block: both
sensors active!
The internal plausibility check of
the sensors failed. The system
stopped to avoid any damage
to the equipment.
Contact Bruker for replacing the
defective parts.

Bruker SampleXpress Specifications

General

Brand	Bruker
Model	SampleXpress
Category	Laboratory Equipment
Language	English