BT Micro Owner’s Manual
156
Switch on/off your phone
To switch off the power of your phone press and hold
during standby.
To switch on the power of your phone press . The battery
icon will display in 10 seconds. If the battery level is too low, the
handset may not power up.
To set your handset’s clock
Your clock resets to 12:00AM or 00:00, depending on time
format you are using, each time you replace the batteries
or switch off the phone.
To set your clock:
1. Press MENU during standby.
2. Press to select DISPLAY, and then press OK.
3. Press to select CLOCK, and then press OK.
4. Press to change the HOUR, and then press
5. Press to change the MINUTE.
If you set the time format of your clock to 12 hours, go to step 6.
If you set it to 24 hours, go to step 7.
6. Press. Press to select AM/PM.
7. Press OK to confirm.
SET THE CLOCK TO 12 HOURS/24 HOURS
To change your phone’s time format:
1. Press MENU.
2. Press to select DISPLAY. Press OK.
3. Press to select TIME FORMAT. Press OK.
4. Press to select 12 HOURS or 24 HOURS.
5. Press OK to confirm.
Using your phonebook
You can use your phonebook to manage your contacts. Your
phone has a private phonebook and a shared phonebook. The
information in your private phonebook is stored in your handset.
If you have more than one handset, each handset has its own
phonebook.
The information in your shared phonebook is stored in System
Speed dial list in the BT Micro. The information is shared by all
the handsets cordless and wired. See system speed dial on
page 50 on programming the list from a featurephone.
Your phone must have a link with the base unit in order to use
the shared phonebook.
Your private phonebook can store 100 records and the system
phonebook has 99 records.
To store a name and number in the private phonebook
Press NAMES.
Select the private phonebook and press OK.
Press to select ADD ENTRY, and then press OK.
Enter the name for the record. You must enter a name.
To Next Page
Loading...
Need help?
General