BT Micro Owner’s Manual
186
To examine system passwords
From the Programming Extension, press the PROGRAMME
Key
Press the Scroll Down Key () until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select
‘Extensions’.
Press the Scroll Down Key () until ‘Examine passwords’ is
displayed.
Select ‘Examine passwords’.
Select either ‘Extension lock password’, or ‘Voicemail
password’, or ‘System VM box’.
1. If you selected ‘Extension lock password’, the
extension menu will appear. Select an extension and
its Extension Lock Password will appear on the display.
2. If you selected ‘Voicemail password’, the extension
menu will appear. Select an extension and its
Voicemail Password will appear on the display.
3. If you selected ‘Answering machine’, the Answering
machine Password appears on the display.
Press the Hands-free Key to finish programming.
To configure Line Key Lights
When a call is placed on System Hold, you can decide if the
associated Line Key Light is to flash or remain steady on all
other featurephones. The default setting is that the light flashes.
From the Programming Extension, press the PROGRAMME
Key
Press the Scroll Down Key () until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select ‘System’.
Press the Scroll Down Key () until ‘Line key light’ is displayed.
Select ‘Line key light’
Choose either ‘Light flashing on hold’ or ‘Light steady on hold’.
Press the Hands-free Key to finish programming.
To prohibit trunk-to-trunk calls on an extension
You may prohibit individual extensions from activating External
Divert, External Transfer and External Conference. (These
features set up so-called trunk-to-trunk calls).
From the Programming Extension, press the PROGRAMME
Key
Press the Scroll Down Key () until ‘System programming’ is
displayed.
Select ‘System programming’.
Enter the System Programming Password and select
‘Extensions’.
Press the Scroll Down Key () until ‘External Diversion’ is
displayed and select.
Select ‘No trunk-to-trunk calls’.
To Next Page
Loading...
Need help?
General