BT Micro Owner’s Manual
199
The Local Area Connection Properties dialog box is displayed
with a list of currently installed network components. If the list
includes Internet Protocol (TCP/IP), then the protocol has
already been enabled. Skip to step 10.
7. If Internet Protocol (TCP/IP) does not display as an
installed component, click Install…
8. In the Select Network Component Type dialog box, select
Protocol, and then click Add…
9. Select Internet Protocol (TCP/IP) in the Network Protocols
list, and then click OK.
You may be prompted to install files from your Windows
2000 installation CD or other media. Follow the instructions
to install the files.
10. If prompted, click OK to restart your computer with the new
settings.
Next, configure the PCs to accept IP information assigned
by BT Micro:
11. In the Control Panel, double-click the Network and Dial-up
Connections icon.
12. In the Network and Dial-up Connections window, right-click
the Local Area Connection icon, and then select Properties.
13. In the Local Area Connection Properties dialog box, select
Internet Protocol (TCP/IP), and then click Properties.
14. In the Internet Protocol (TCP/IP) Properties dialog box, click
the radio button labelled Obtain an IP address
automatically. Also click the radio button labelled Obtain
DNS server address automatically.
15. Click OK twice to confirm and save your changes, and then
close the Control Panel.
Windows Me PCs
1. In the Windows task bar, click the Start button, point to
Settings, and then click Control Panel.
2. Double-click the Network and Dial-up Connections icon.
3. In the Network and Dial-up Connections window, right-click
the Network icon, and then select Properties.
4. The Network Properties dialog box displays with a list of
currently installed network components. If the list includes
Internet Protocol (TCP/IP), then the protocol has already
been enabled. Skip to step 11.
5. If Internet Protocol (TCP/IP) does not display as an
installed component, click Add…
6. In the Select Network Component Type dialog box, select
Protocol, and then click Add…
7. Select Microsoft in the Manufacturers box.
8. Select Internet Protocol (TCP/IP) in the Network Protocols
list, and then click OK.
9. You may be prompted to install files from your Windows Me
installation CD or other media. Follow the instructions to
install the files.
10. If prompted, click OK to restart your computer with the new
settings.
11. Next, configure the PCs to accept IP information assigned
by BT Micro:
To Next Page
Loading...
Need help?
General