BT Micro Owner’s Manual
200
12. In the Control Panel, double-click the Network and Dial-up
Connections icon.
13. In Network and Dial-up Connections window, right-click the
Network icon, and then select Properties.
14. In the Network Properties dialog box, select TCP/IP, and
then click Properties.
15. In the TCP/IP Settings dialog box, click the radio button
labelled Server assigned IP address. Also click the radio
button labelled Server assigned name server address.
16. Click OK twice to confirm and save your changes, and then
close the Control Panel.
Windows 95, 98 PCs
1. First, check for the IP protocol and, if necessary, install it:
2. In the Windows task bar, click the Start button, point to
Settings, and then click Control Panel.
3. Double-click the Network icon.
4. The Network dialog box displays with a list of currently
installed network components. If the list includes TCP/IP,
and then the protocol has already been enabled. Skip to
step 16.
5. If TCP/IP does not display as an installed component, click
Add…
6. The Select Network Component Type dialog box displays.
7. Select Protocol, and then click Add…
8. The Select Network Protocol dialog box displays.
9. Click on Microsoft in the Manufacturers list box, and then
click TCP/IP in the Network Protocols list box.
10. Click OK to return to the Network dialog box, and then click
OK again.
11. You may be prompted to install files from your Windows
95/98 installation CD. Follow the instructions to install the
files.
12. Click OK to restart the PC and complete the TCP/IP
installation.
Next, configure the PCs to accept IP information assigned by
BT Micro:
16. Open the Control Panel window, and then click the Network
icon.
17. Select the network component labelled TCP/IP, and then
click Properties.
If you have multiple TCP/IP listings, select the listing
associated with your network card or adapter.
18. In the TCP/IP Properties dialog box, click the IP Address
tab.
19. Click the radio button labelled Obtain an IP address
automatically.
20. Click the DNS Configuration tab, and then click the radio
button labelled Enable DNS.
21. Click OK twice to confirm and save your changes.
You will be prompted to restart Windows.
22. Click Yes.
To Next Page
Loading...
Need help?
General