BT Micro Owner’s Manual
27
Setting Class of Service Codes
The definition of what constitutes Restricted, Allowed, National
& International calls is determined by the leading digits of the
dialled number.
For example, numbers beginning with ‘00xx’ normally are
International calls. Numbers beginning with just a single zero
‘0xx’ are normally considered National calls.
The definition of Allowed and Restricted codes is at the user’s
discretion.
50 entries can be configured in the dialling codes for
International, National, Allowed & Restricted numbers.
These dialling rules can be configured manually. See ‘To
change the Allowed, Restricted, National and International
codes, click here’ on the ‘Edit Class of Service Extensions’
page.
WARNING
The Apply button must be clicked before the page is exited for the
changes to take effect. The settings will be lost if this is not done.
DECT Registration
The cordless extensions are shown as registered or not
registered. When Register a handset is selected a prompt is
displayed indicating that the ‘Reg’ key on the cordless phone
should be selected and that the PIN is 1234. The system is set
in registration mode for 30 seconds
To unregister an extension select Unregister.
To Next Page
Loading...
Need help?
General