BT Micro Owner’s Manual
48
Handsfree calls
Handsfree provides the convenience of talking to the caller
without holding onto the phone. You can communicate by using
the speaker/microphone of the phone. Handsfree also allows
others in the room to be involved in the conversation.
Press OPTIONS when on a call. Select SPEAKER. Press OK.
1. You can hear the caller over the loudspeaker and you can
speak via the microphone.
2. Repeat step 1 to switch off the speaker.
Turning off the ringer
Press SILENT when the phone is ringing to turn off the ringer
for the call.
You can also press and hold
*
when the phone is in standby to
turn off the ringer for all the calls. (Press and hold again to turn
on the ringer.)
Adjusting the volume on a call
You can increase or decrease the volume during a call. There
are 3 volume levels for selection.
To adjust the volume, during a call:
Press The display shows the current volume level. Press
to adjust the volume.
Using Mute on a call
During a call, if you wish to speak to someone privately without
having the caller hear your conversation,
Press MUTE. The caller cannot hear you, but you can hear the
caller.
Press UNMUTE to communicate with your caller again.
For more detailed instructions on the DECT phone see page
155.
Message Waiting Indication
A message indication symbol appears on your DECT
handset and a broken dial tone is heard when going off hook,
when a message has been left in the Answering Machine or the
extension’s voicemail.
To access the message press and dial
*
.
To access the answering machine dial 0 as the extension
number.
The default password is 1111 for all mailboxes.
To Next Page
Loading...
Need help?
General