BT Micro Owner’s Manual
90
Add new interface
There is an option to tell the DHCP server to operate on the
ipdmz interface as well as the iplan.
Existing DHCP Server Subnets
The settings for the existing subnets on the iplan and ipdmz are
displayed.
All displayed parameters can be changed – change the setting
to a new value and click “Apply”.
To delete a subnet, check the associated box and select
“Apply”.
Advanced Options
Select “Advanced Options”
The following screen is displayed
Parameters for this subnet
The current subnet parameters are shown. These can be
changed if required.
IP addresses to be available on this subnet
The range of IP addresses available on the subnet is shown.
These can be changed if required.
To Next Page
Loading...
Need help?
General