128
9600 Mobile Computer
Reference Manual
2) Tap the icon to access the menu that allows you to choose and enable one or
both of the readers. There will be a check mark in front of the reader if it is enabled.
If the RFID Reader is installed, the option will be available.
3) To meet your application requirements, proceed to configure associated reader
settings as well as barcode settings.
Note: (1) The ReaderConfig.exe utility will automatically detect the reader module(s)
that is currently installed in the mobile computer.
(2) If you wish to reload the default settings, delete the ReaderCfgINI.txt file in
DiskOnChip before launching the program, or tap [Restore Defaults] on the
General tab after launching the program.
To Next Page
Loading...
