48
9600 Mobile Computer
Reference Manual
2.5 SUSPEND & RESET
Like your PDA, Pocket PC and most handheld devices, 9600 Mobile Computer functions
when it is turned on. This is because the Windows CE operating system eliminates the
booting process and runs continuously.
You may turn off the mobile computer if necessary or reset the mobile computer when it
stops responding to input.
Operation
Wireless Power (Wi-Fi, GSM/GPRS, Bluetooth)
Resume from Suspend Will maintain the power settings in Power Management
After Software Reset
After Hardware Reset
Will go through a power cycle and follow the power settings in Power
Management
Warning: Never perform hardware reset unless software reset cannot solve your
problems.
2.5.1 SUSPEND MODE
When the mobile computer enters suspend mode, the system is ready for use but not in
use. This is referred to as Suspend mode or Standby mode. It means the system is in
power-saving status and waiting for user interference.
Turn On (= Resume from Suspend)
Press [Power] for more than 1 second to turn on the mobile computer. Alternatively, you may
press the SCAN key.
Turn Off (= Suspend)
Press [Power] for more than 1 second to turn off the mobile computer.
Warning: To save battery power, it is suggested that the mobile computer is set to
be automatically turned off when not in use. Refer to 1.1.2 Power
Management
for more information about saving power.
To Next Page
Loading...
