CipherLab 9600 - Button Assignment Utility

146
9600 Mobile Computer Reference Manual
8.2 BUTTON ASSIGNMENT UTILITY
The CipherLab Button Assignment Utility allows the following keys to be re-defined to
another key or serve as a shortcut key for launching a specific program.
 SCAN key
 Side triggers on each side of the touch screen
 SEND key
 END key
Note: By default, the two side triggers are programmed to serve as SCAN keys.
Go to Start | Programs | Buttons to open the CipherLab Button Assignment Utility.
1) Tap the label of one of these keys.
For example, tap [L. Key] to configure the side trigger on the left.
2) You may input a hex value or assign one of the following key values to the left side
trigger or have it serve as a shortcut key to launch a specific program.
 Enter
 Scan
 Esc
 Delete
 Backspace
1
2
3
4