130
9600 Mobile Computer
Reference Manual
7.3 RFID READER SETTINGS
If the RFID scan engine is present, configurable options will be displayed.
Note: Because it is possible to read barcode and RFID tag at the same time, it is
recommended that only one scan engine is enabled at a time to prevent from
misreading.
Some RFID tags support both read/write operations, on a page-by-page basis. You may
find it necessary to define your own read/write operation. For reference only, the table
below lists the start page for read/write operation on a number of RFID tags.
Start Page Tag Type Standard
-1 Start from byte 0 of the default page (see below) for all tags
4 Mifare ISO 14443A
4 SR176 ISO 14443B
3 ICODE SLI ISO 15693
0 LRI512 ISO 15693
3 SRF55VxxP ISO 15693
0 EM4135 ISO 15693
0 Tag-it HF-I ISO 15693
0 Others ISO 15693
5 ICODE ICODE® (Phillips)
0 Tag-it Tag-it® (TI)
Note: Please refer to the specifications of your RFID tags for memory organization.
To Next Page
Loading...
