29
Chapter 1
Using 9600 Mobile Computer
1.5 NOTIFICATIONS
1.5.1 STATUS LED
The tri-color LED on top is used to provide information on the charging status or wireless
power status. The green LED is also used for "Good Read" while collecting data.
Tri-color LED
Status Description
Solid Charging 9600 Red LED
Flashing Error occurs while charging or powering on
Note
Solid Charging done Green LED
Solid for 0.5 second Good Read
Blue LED Flashing Bluetooth enabled
Note: (1) Charging error may be caused by the condition when the temperature drops
below 0°C or exceeds 40°C. Refer to Charging & Communications.
(2) Power-on error occurs to indicate pressing [Power] cannot turn on 9600 when
the battery cover is not properly in position, or the main battery charge drops
below 5%. Refer to
1.1 Battery.
1.5.2 AUDIO
Buzzer
The buzzer on the front can be programmed for status feedback. Its frequency and
duration are software programmable.
Speaker
The mono speaker on the back is used to play sounds for events in Windows and
programs, or play audio files such as .WAV files. In addition, it can be programmed
for status feedback. In noisy environments, you may consider connecting a headset
instead.
Headset
A headset jack is provided, which is a 2.5 mm DIA stereo earphone jack with
microphone input. It is required for phone applications. Bluetooth headset is also
supported.
1.5.3 VIBRATOR
The mobile computer is integrated with a vibrator, which is software programmable for
feedback. This can be helpful when working in noisy environments.
To Next Page
Loading...
