14
9600 Mobile Computer
Reference Manual
USING CRADLE
1) Seat the mobile computer in the cradle.
2) Connect the power supply cord to the power receptacle on the cradle.
3) Connect the other end of the power cord to a suitable power outlet.
4) Connect the USB charging & communication cable if data transmission is required.
Refer to
Using ActiveSync.
Note: (1) Make sure that you have Microsoft ActiveSync installed on your computer
before you connect the cable from the cradle to your computer.
(2) As the mobile computer will be charged via cradle, the power receptacle on the
cable connector is non-functional.
Figure 8: Using Cradle
To Next Page
Loading...
