FOR HAND-HELD PRODUCT WITH RF FUNCTIONS
9600 serial handheld equipment uses wireless radios that have been designed and
manufactured to meet safety requirements for limiting exposure to radio waves. When
used in accordance with the instructions set forth in this manual, the equipment has been
independently verified to not exceed the emission limits for safe exposure to radio
frequency (RF) energy as specified by the FCC of the U.S. Government in 47 CFR
§2.1093 and EN50360 of EEC.
These limits are part of comprehensive guidelines and establish permitted levels of RF
energy for the general population. The guidelines are based on standards that were
developed by independent scientific organization through periodic and thorough
evaluation of scientific studies. The standards include a substantial safety margin
designed to assure the safety of all persons, regardless of age and health.
The exposure standard for all wireless devices employs a unit of measurement known as
the Specific Absorption Rate, or SAR; the SAR limit set by the FCC1 is 1.6W/kg (or CE is
2.0W/Kg).
Tests for SAR on 9600 serial handhelds have been undertaken using the standard
operating positions adopted by the FCC that test the device for SAR while it is
transmitting at the highest certified power level in all tested frequency bands.
The FCC has granted an Equipment Authorization for this device on the basis that all
reported SAR levels have been evaluated to be compliant with the FCC RF exposure
guidelines.
SAR information on this device is on file with the FCC and can be found under the Display
Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID: Q3N-9600.
For trunk, the SAR values of the 9600 serial handheld is
USA: MAX 0.153W/Kg
EEC: MAX 0.049W/Kg
FOR PRODUCT WITH LASER
CAUTION
This laser component emits FDA / IEC Class 2 laser light at the exit port. Do not
stare into beam.
To Next Page
Loading...
