CipherLab 9600 - Page 7

2.00 July 09, 2010
 Modified: Using Cradle — Power receptacle on the cable connector
is non-functional when using cradle
 Modified: 1.1.2 Power Management — UI updated
 Modified: 1.3 Keypad — Remove 43-key Keypad
 Modified: 1.5.1 Status LED — Red LED flashes while charging error
 Modified: 1.7 Cradles — LED indicators description
 Modified: 2.1.2 Taskbar — UI updated
 Modified: 2.1.3 Start Menu — Remove “Suspend” from Start Menu
 New: 2.5.1 Suspend Mode Modified: 3.1 Application Manager — UI
updated
 Modified: 3.3 System Settings — Add “BT Manager”, “External
Port”, and “GSM/GPRS Manager”
 Modified: 3.5.1 SD Download — Downgrading is not allowed
Modified: Chapter 5 Using Bluetooth — UI updated
 New: 5.1.1 Bluetooth Profiles Supported
 Modified: Chapter 6 Using GSM/GPRS — UI updated
 Modified: 7.3 RFID Reader Settings — UI updated and rename Tag
Type “Mifare Ultralight” with “Mifare” and change the Start Page to
“4”
 Modified: 8.4.3 Changing Camera Settings — Remove “240 x 180”
pixels resolution and change saving format to
HHMMSS_YYMMDD.jpg or HHMMSS_YYMMDD.bmp.
 Modified: Appendix III — Move “Inter-Character Gap” under
Codabar and Code 39, and add “ISBT Concatenation” and “ISBT
Concatenation Redundancy” for 2D Imager
1.02 Jan. 11, 2010
 Modified: 1.3.4 Function Key — Add function key combinations
(Home/End/PgUp/PgDn)
 Modified: 7.7 Symbology Settings — Renamed “Pharmacode” with
“I/F Pharma.” and updated the screenshot
1.01 Jan. 04, 2010
 Modified: Installing Battery — Procedures updated
1.00 Dec. 21, 2009
Initial release