72
9600 Mobile Computer
Reference Manual
WPA2-PSK AES with PSK, ASCII passphrase or hex PSK
WPA2 AES AES with key generated during EAP authentication
WPA2 CCKM AES with key generated during EAP authentication and with Cisco key
management protocol for fast re-authentication
Default: None
EAP Type & Credentials
Extensible Authentication Protocol type used for 802.1X authentication to AP
Value:
None
LEAP Credentials values for LEAP
User: Username or Domain\Username (up to 64 characters)
Password (up to 32 characters)
EAP-FAST Credentials values for EAP-FAST
User: Username or Domain\Username (up to 64 characters)
Password (up to 32 characters)
PAC Filename (up to 32 characters)
PAC Password (up to 32 characters)
PEAP-MSCHAP
PEAP-GTC
EAP-TTLS
PEAP-TLS
Credentials values for PEAP-MSCHAP, PEAP-GTC, EAP-TTLS, PEAP-TLS
User: Username or Domain\Username (up to 64 characters)
Password (up to 32 characters)
CA Cert: Filename of root certificate authority (CA) digital certificate
(up to 32 characters); leave blank if the “Use MS store” checkbox is
selected.
“Validate server” checkbox: Select this if using a CA certificate to
validate an authenticate server. When selected, enter a certificate
filename in the CA Cert field or select the “Use MS store” checkbox.
“Use MS store” checkbox: Select this if the Microsoft certificate store
should be used for a CA certificate. This is applicable only when
“Validate server” is in use.
EAP-TLS Credentials values for EAP-TLS
User: Username or Domain\Username (up to 64 characters)
User Cert: Tap the […] button to select a user (or client) certificate
from the Microsoft certificate store. You may not enter a filename
because the user certificate must reside in the Microsoft certificate
store. When you browse for a certificate, the pop-up box shows two
fields, “Issued By” and “Issued to”.
CA Cert: Filename of root certificate authority (CA) digital certificate
(up to 32 characters); leave blank if the “Use MS store” checkbox is
selected.
“Validate server” checkbox: Select this if using a CA certificate to
validate an authenticate server. When selected, enter a certificate
filename in the CA Cert field or select the “Use MS store” checkbox.
“Use MS store” checkbox: Select this if the Microsoft certificate store
should be used for a CA certificate. This is applicable only when
To Next Page
Loading...
