81
Chapter 4 Using 802.11 Radio
Value: Standard or OPMK (opportunistic PMK)
Default: Standard
TX Diversity How to handle antenna diversity when transmitting data to AP —
Value:
Main Only Use main antenna only
Aux Only Use auxiliary antenna only
On Use diversity
Default: On
RX Diversity How to handle antenna diversity when receiving data from AP —
Value:
Main Only Use main antenna only
Aux Only Use auxiliary antenna only
On-start on Main On startup, use main antenna
On-start on Aux On startup, use auxiliary antenna
Default: On-start on Main
Frag Thresh If packet size exceeds threshold, then it is fragmented —
Value: 256 ~ 2346
Default: 2346 (bytes)
RTS Thresh Packet size above which RTS/CTS is required on link —
Value: 0 ~ 2347
Default: 2347 (bytes)
LED N/A
Tray Icon Whether to enable the system tray icon or not —
Value: On, Off
Default: On
Hide Passwords Whether to hide the passwords and other sensitive information, such as
WEP keys, in SCU as well as EAP authentication dialog boxes —
Value: On, Off
Default: Off
Admin Password N/A
Auth Timeout (s) Specifies how long it will wait for an EAP authentication request to succeed
or fail. If authentication credentials are specified in the active profile and
the authentication times out, then association will fail. If authentication
credentials are not specified in the active profile and the authentication
times out, then the user will be required to enter credentials again.
Value: 3 ~ 60
Default: 8 (seconds)
Certs path File path where the certificate for EAP authentication is stored —
Value: A valid directory path of up to 64 characters
Default: Depends on device
To Next Page
Loading...
