Cisco A9K-SIP-700 Configuration Guidelines

Where DocumentedChanged in ReleaseDescriptionFeature
EVPN Multiple Services
per Ethernet Segment, on
page 553
Release 6.3.2EVPN Multiple Services
per Ethernet Segment
(ES) feature allows you to
configure multiple
services over single ES.
EVPN Multiple Services
per Ethernet Segment
EVPN VPWS
On-Demand Next Hop
with SR-TE, on page 650
Release 6.3.2The EVPN VPWS
On-Demand Next Hop
with SR-TE feature
enables you to fetch the
best path to send traffic
from the source to
destination in a
point-to-point service
using IOS XR Traffic
Controller (XTC).
EVPN VPWS On
Demand Next Hop with
SR-TE
EVPN VPWS Preferred
Path over SR-TE Policy,
on page 620
Release 6.3.2EVPN VPWS Preferred
Path over SR-TE Policy
feature allows you to set
the preferred path between
the two end-points for
EVPN VPWS pseudowire
(PW) using SR-TE policy.
EVPN VPWS Preferred
Path over SR-TE Policy
EVPN VXLAN Ingress
Replication, on page 557
Release 6.3.2The EVPN VXLAN
Ingress Replication
feature enables the
VXLAN tunnel endpoint
(VTEP) to exchange local
and remote VTEP IP
addresses on the Virtual
Network Identifier (VNI)
in order to create the
ingress replication list.
EVPN VXLAN Ingress
Replication
L2VPN VPLS or VPWS
Preferred Path over
SR-TE Policy, on page
634
Release 6.3.2L2VPN VPLS or VPWS
Preferred Path over
SR-TE Policy feature
allows you to set the
preferred path between the
two end-points for
L2VPN Virtual Private
LAN Service (VPLS) or
Virtual Private Wire
Service (VPWS) using
SR-TE policy.
L2VPN VPLS or VPWS
Preferred Path over
SR-TE Policy
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
2
New and Changed VPN Features
New and Changed VPN Features

Cisco A9K-SIP-700 Specifications

General

Brand	Cisco
Model	A9K-SIP-700
Category	Network Router
Language	English